Fill up 2

301001

Fill up 2 - basic set for beekeepers, ready to bottle honey!

How it works

The honey is sucked out of any honey container/hobbock by the included hose (Ø 40 mm) and a check valve and is dosed directly into the honey glass without dripping.

from 2470,00 € *

from 2 939,30 € (incl. VAT)
* ex works DD, net price

Inquiry form

More details

301001
New product
 
More info

Fill up 2 running with a turn table:

What it is

The Fill up 2 is our basic set for beekeepers. You can directly start to fill honey, no further accessories are needed.

The Fill up 2 is primarily interesting for beekeepers with more than ten bee colonies.

Moreover, with the machine honey can be pumped or made creamy. The required accessories are included in the scope of delivery for all three options (e.g. a pipe bend for pumping and a total of 4 m hose).

How it works

The honey is sucked out of any honey container/hobbock by the included hose (Ø 40 mm) and a check valve and is dosed directly into the honey glass without dripping. Depending on the diameter of the glass and the viscosity of the honey you can choose from several included filling nozzles which are included in the scope of delivery.

Filling temperatures

The machine fills freshly extracted, liquid and creamy honey at temperatures from 20 – 25 °C / 68 – 104 °F. Very creamy, heavy-body honey (e.g. rape honey) with little water content has to be heated up to to ensure a quick and exact filling process.

Technical data

Filling: any sort of honey
Amount per hour: 420 kg/h resp. 300 l/h
Filling speed: ca. 400 jars at 500 g/h
Filling exactness: ca. +- 1-2 g at 500 g
Filling amount: from 5 g to 35 kg, choosable in steps of 1 g (all common filling amounts for honey are pre-programmed)
Sucking height: max. 1.5 m (self-priming)
Pumping height (honey): 4 m
Motor power: 100 W
Nominal voltage: 230 V / 50 Hz
Height under filling nozzle: 5-30 cm (stand 50 cm)optional: 5-50 cm (stand 70 cm)optional: 5-80 cm (stand 100 cm)
Weight: ca. 16 kg
Measures: 320 x 350 x 500 mm

Extension sets

With our extension sets „Propolis“ or „Royal“ for the Fill up 2 you can easily extend your machine to fill up propolis solution, royal jelly or mead.

Parts list

Item Quantity Description Art. No. Wear part
1 1 pc. Driving module Fill up 2 (incl. item 2) 301002
2 1 pc. Gear pump head L 302001 x
3 4 m Spiral hose, inner Ø 40 x 3 mm 304002 x
4 1 pc. Power supply 230 V 307014
5 2 pc. Wedge nozzle, outside Ø 26 mm, hard 306015 x
6 1 pc. Conical filling nozzle 306002 x
7 1 pc. Support, for conical filling nozzle 306005 x
8 1 pc. Flat filling nozzle 306001 x
9 1 pc. Limitation cross, for flat filling nozzle 306006 x
10 1 pc. Combination wrench, SW 10 mm 307007
11 2 pc. Micro fuse 8 A, medium time-lag 307009 x
12 2 pc. Gasket, for gear pump head L (for pipe bend/flange) 307004 x
13 1 pc. Clamping flange, for filling nozzles (preassembled) 306007
14 3 pc. Hose clamp size 48 304066
15 1 pc. Check valve with membrane, outside Ø 40 mm (incl. item 14) 306038
16 1 pc. Pipe bend 90° sideways, outside Ø 40 mm, with flange (incl. item 12, 14) 304001
17 1 pc. Power cable, EU-plug 307022
18 1 pc. Microswitch, 5-pin plug, length 50 cm (for fill up 2 models from 2008) 307039
19 1 pc. Y-bracket 307034
20 1 pc. Pipe bend 90° backwards, outside Ø 40 mm, with flange (incl. item 12, 14) 304034
21 1 pc. Sealing set, for gear pump head L (replacement for pump head) 307043 x
22 1 pc. Stand 50 cm, with rod 20 x 40 mm (incl. item 19) 303012

5 other products in the same category: